Ticarileşen, Ticarileşme Aşamasında olan veya Ticarileşme Potansiyeli olan Ürünler
Geliştirilen Başlıca Yöntemler, Prosedürler, Mekanizmalar, Ürünler, Yönetmelikler
Yayınlar, Patentler vb.
1) Yanılmaz M.,KalaoğluF.,”Investigation of wicking,wetting and drying properties of acrylic knitted fabrics”textile Research Jornal,December 2012,Vol 82,820-831
2) BahadırSenem K.,Koncar V.,Kalaoğly F. “Assessing the Signal Quality of an Ultrasonic Sensor on Different Conductive Yarns Used as Transmission Lines,Fibers and Textiles in east Europe,Vol 19 Issue no5 (88)/2011 ,75-81
3) Bahadır S.K.,Kalaoğlu F.,Thomassey S.,Koncar V.,”A study on the beam pattern of ultrasonic sensor integrated to Textile structure”,International Journal of Clothing science and Technology,Vol 19,İssue 4 2011,232-241
4) EryurukS.H.,Kalaoglu F.,BaskakM.,”Logisticscetre design for the Turkish Clothing Industry ,Fibres and textiles in eastern Europe, vol 19,no 5(88),2011,sayfa 17-22
5) EryurukS.H.,Kalaoglu F.,Baskak M., “Assembly Line Balancing by using statistical method in clothing production”,tekstilveKonfesiyon,vol 21,ıssue 1 ,2011,65-71
6) BilgiM.,Kalaoglu F., The effects of special finishing processes on the performance EryurukS.H.,Kalaoglu F.,BaskakM.,”Evaluation Globalization Strategies and Internal analysis of the Turkish Clothing Industry”, TekstilveKonfeksiyon, Volume 21, Issue 2,2011,s100-106
7) Cetiner, S., Kalaoglu, F., Karakas, H., Sarac, A.S., “Preparation and Characterization of Conductive Poly(Acrylonitrile-co-Vinyl Acetate) Composite Films: Matrix Polymerization of Pyrrole Derivatives’’, Fibers and Polymers No 12(2),151-158,2011
8) Cetiner, S., Kalaoglu, F., Karakas, H., Sarac, A.S., “Dielectric, FTIR Spectroscopic and Atomic force microscopic (AFM) Studies on Polypyrrole-Poly(Acrylonitrile-co-Vinyl Acetate) Composites’’, Polymer CompositesV32,issue 4,546-557,2011
9) Cetiner, S., Olariu, M., Ciobanu, R.C., Karakas, H., Kalaoglu, F., Sarac, A.S., “Polypyrrole-Polyacrylonitrile Composite Films: Dielectric, Spectrophotometric and Morphologic Characterization’’, Fibers and Polymers, 11(6), 843-850 (2010).
10) Cetiner, S., Kalaoglu, F., Karakas, H., Sarac, A.S., “ElectrospunNanofibers of Polypyrrole-Poly(Acrylonitrile-co-Vinyl Acetate)”, Textile Research Journal, 80(17), 1784-1792 (2010).
11) Cetiner, S., Karakas, H., Ciobanu, R.C., Olariu, M., Kaya, N.U., Unsal, C., Kalaoglu, F., Sarac, A.S., “Polymerization of Pyrrole Derivatives on Polyacrylonitrile Matrix, FTIR-ATR and Dielectric Spectroscopic Characterizationof Composite Thin Films”, Synthetic Metals, 160, 1189-1196 (2010).
12) Eryürük S.H.,Kalaoğlu “Theeffects of Differentamonuts of Lubricant Application on thesewingthreadPerformance”, TextileResearchJournal ,2010,Vol80(12), 1232-1242
13) Eryuruk S.H, RabenosoloB.,Kalaoglu F.,Baskak M. “The Evaluation of Globalization Strategies :External Analysis of Turkish Clothing Industry”,Textile Research Journal,2010, Vol 80(14),1379-1391
14) Eryuruk, S.H., Kalaoglu, F., Baskak,” Logistics as a competitive stragtegy:theAnalysisi of a clothing industry in terms of logistics “,Fibers and Textiles in Eastern Europe,Vol 19, No. 1 (84), pp.12-17,2011/1.
15) Yanilmaz, M., Kalaoglu, F., Karakas, H., Sarac, A.S.,“Effects of polypyrrole on the characteristics of polyurethane based composites”, TekstilveKonfeksiyon, (2011/1),Volume 21” ,issue 1,sayfa3-9
16) Kurşun S.,Dinçmen M., Kalaoğlu F. “Production line modeling in clothing industry by simulation”, Tekstil, Vol 58, no 5, May 2009, sayfa186-195
17) KursunS., Kalaoğlu F., “Simulation of Production line balancing in Apparel Manufacturing” Fibers and textiles in Eastern Europe,2009/4,Vol 17,p 68-71
18) Eryürük H., Kalaoğlu F., “Assembly Line balancing in a Clothing Company”, Fibers and Textiles in Eastern Europe ,2008/1,Vol16,p93-98
19) Sarıçam C.,Kalaoğlu. F, “An application of development and analysis of modular manufacturing system in clothing industry”, Fibers and Textiles in Eastern Europe, 2007/3,p 67-70
20) Ozdemir O.,Şardağ S., Kalaoglu F., “Effects of twisting methods on the plied yarn properties” ,Indian Journal of Fiber and Textile Research, Vol31,September 2006,pp394-400
21) Kalaoğlu F.,MeriçB.,Investigation of the Performance of linings, International Journal of Clothing Science and Technology,Vol17,No 3/4,2005,pp171-178
22) Uçar N.,Kalaoğlu F.,Bahtiyar D.,Bilaç O.E., Investigating the Drape Behaviour of Seamed Knit fabrics with Image Analysis, Textile Research Journal, 74(2),166-174 (2004)
23) Önder,E., Kalaoğlu, F. and Özipek, B. “ The Influence of Varying Structural Parameters on the Properties of 50.50 Wool.Polyester Blended Fabrics”, Textile Research Journal,73(10),854-860 (2003)
24) Kalaoğlu, F., Önder,E., and Özipek, B. “ The Influence of Varying Structural Parameters on Abrasion Characteristics of 50.50 Wool.Polyester Blended Fabrics”, Textile Research Journal, 73(11),980-984 (2003)
25) Kalaoğlu, F. and Önder, E. " Pilling and Abrasion Performances of Worsted Fabrics“, International Textile Bulletin, 4/2003,pp51-52
26) Önder, E.,andKalaoğlu, F. “ An Outlook of the Home TextileIndustry in Turkey”, International TextileBulletin, 2/2003,48-50
27) Kalaoğlu F.,Usbaş A. “Comparison of theDrape of TencelFabricsby Image Analysis”, International TextileBulletin, Eylül 2001, s.69-72
28) Kalaoğlu F., Demir E. “The Effect of Chenille Yarn Properties on the Performance of Chenille Upholstery Fabrics”, International Textile Bulletin,s.53-57.
29) Kalaoğlu F., Bütün H. “The Strength of Ultrasonically Welded Laminates”, International Textile Bulletin, Nonwoven Industrial Textiles, 4th quarter2001,s.25-28.
30) KalaoğluF.,Taşkın G. “ The Performance of Wool Stretch Fabrics”, International Textile Bullet in, Yarn and Fabric Forming, 2001/1, s.52-60.
31) Kalaoğlu F. “Ultrasonic Seaming of Technical Textiles”, Technical Textiles,44, February 2001, s.32-35.
32) Kalaoğlu F., Özdemir Ö.'' Performance of Lyocell and Lyocell Blend Yarns'', Melli and International, Eylül 2000, s.175-178.
33)Ünsal C.,Kalaoğlu F., Karakaş H., Saraç A.S. '' Polypyrrole/Poly(acrylonitrile-co-butyl acrylate) Composite'', Advances in Polymer Technology, 32, 784-792 (2013).
34) Saricam C., Kalaoglu F. '' Investigation of the Wicking and Drying Behaviour of Polyester Woven Fabrics'', Fibres & Textiles in Eastern Europe 2014; 22, 3(105):73-78.
35) Eryuruk SH, Kalaoglu F., Bahadir SK, Jevsnik S.'' Analysing the Effect of Decatising on the Frictional Properties of Wool Fabrics'',Fibres & Textiles in Eastern Europe 2014; 22, 3(105):79-83.
36)Uçar N., Karakaş H., Şen S., Physical and Comfort Properties of the Hosiery Knit Product Containing Interminlged Nylon Elastomeric Yarn, Fibers and Polymers, Vol. 8, No. 5, 2007.
37)Armağan A.G., Karakaş H., “A Study of Performance and Comfort Properties of Waterproof Breathable Laminated Knitted Fabrics”, Tekstil, 57 (12) 632-640 (2008).
38)Parlar Z., Canbaz Karakaş H., “Friction Characteristics of Polypropylene Fibers”, Tekstil, 59 (4), 109-114 (2010).
39)Çetiner S., Karakaş H., Ciobanu R., Olariu M., Kaya N.U., Ünsal C., Kalaoğlu F., Saraç A.S., “Polymerization of pyrrole derivatives on polyacrylonitrile matrix, FTIR-ATR and dielectric spectroscopic characterization of composite thin films”, Synthetic Metals, 160, 1189-1196 (2010).
40)Çetiner S., Kalaoğlu F., Karakaş H., Saraç A.S., “Electrospun Nanofibers of Polypyrrole-Poly(Acrylonitrile-co-Vinyl Acetate), Textile Research Journal, Vol 80(17): 1784-1792 (2010).
41)Çetiner S., Olariu M., Ciobanu R., Karakaş H., Kalaoğlu F., Saraç A.S., “Polypyrrole/Polyacrylonitrile Composite Films: Dielectric, Spectrophotometric and Morphologic Characterization”, Fibers and Polymers, Vol.11, No:6, 843-850, (2010).
42)Çetiner S., Kalaoğlu F., Karakaş H., Saraç A.S., “Characterization of Conductive Poly(Acrylonitrile-co-Vinyl Acetate) Composites: Matrix Polymerization and Pyrrole Derivatives”, Fibers and Polymers, Vol.12, No:2, 151-158, (2011).
43)Çetiner S., Kalaoğlu F., Karakaş H., Saraç A.S., “Dielectric, FTIR Spectroscopic and Atomic Force Microscopic (AFM) Studies on Polypyrrole-Poly(Acrylonitrile-co-Vinyl Acetate) Composites”, Polymer Composites, Volume 32, Issue:4, 546-557, Appril (2011).
44)Yanılmaz M., Kalaoğlu F., Karakaş H., Saraç A.S., “Effects of Polypyrrole on the Characteristics of Polyurethane Based Composites” Tekstil ve Konfeksiyon, Volume:1, 3-9, (2011).
45)Canbaz Karakaş, H., “A Comparison between the Thermomechanical and Structural changes in Textured PET Yarns after Superheated Steam and Dry Heat Treatment,” Fibers and Polymers, Vol. 5, No.1, 19-24, (2004).
46)Canbaz Karakaş, H., ve H. Dayıoğlu, “Influence of Major False-Twist Texturing Parameters on the Structural Properties of Polyamide 6.6 Yarn,” Fibres & Textiles in Eastern Europe, Vol. 12, No 2(46), April/June (2004).
47)Onbaşıoğlu, S., H. C. Karakaş ve H. Dayıoğlu, “An Experimental and Computational Approach to the Heat Transfer Mechanism in the Cooling Channel of a Texturing Process,” International Communications in Heat and Mass Transfer, Vol. 31, No. 8 pp. 1155-1164, (2004).
48)Uçar, N. ve H. C. Karakaş, “Effect of Lyocell Blend Yarn and Pile Type on the Properties of Pile Loop Knit Fabrics,” Textile Research Journal, 75(4), 352-356 (2005).
49)Canbaz Karakaş, H. ve H. Dayıoğlu, Influence of Major False-Twist Texturing Parameters on the Structural Properties of Polyester Yarn, Indian Journal of Fibre & Textile Research, Vol.30, 37-41, March 2005.
50)Canbaz Karakaş H., Ereke S.,ö Açıkalın P., Türköz E., “Comparison of the ultraviolet blocking effect of knitted fabrics”, Tekstil, 59 (9), 397-402, (2010)
51)Yanılmaz M, Karakaş H., Kalaoğlu F., Saraç A.S., “Preparation and Characterization of Electrospun Polyurethane-*Polypyrole Nanofibers and Films”, Journal of Applied Polymer Science’da yayınlanmak üzere kabul edildi.
52)Yanılmaz M., Kalaoğlu F., Karakaş H., “Study on Optimizing the Morphology of Electrospun Polyurethane Nanofibers”, Tekstil ve Konfeksiyon, 2012, Volume 22, No. 3, 212-217.
53)O.G. Armağan, B. Karaguzel Kayaoglu, H. Canbaz Karakas, F. S. Guner, “Adhesion Strength Behaviour of Plasma Pre-Treated and Laminated Polypropylene Nonwoven Fabrics Using Acrylic and Polyurethane-Based Adhesives”, Journal of Industrial Textiles, 43(3), 396414 (2014)
54)O.G. Armağan, B. Karagüzel Kayaoğlu, H. Canbaz Karakaş, F. S. Güner, “Improving the Adhesion Strength of Polypropylene Nonwoven Laminated Fabrics Using Low-Pressure Plasma”, Fibres & Textiles In Eastern Europe, 21, 3(99), 96101 (2013)
55)O.G. Armağan, B. Karagüzel Kayaoğlu and H. Canbaz Karakaş, “Plasma-Induced Adhesion Improvement of Cotton/Polypropylene-Laminated Fabrics”, Journal of Adhesion Science and Technology, 27, 21, 2326 2339 (2013)
56)Canbaz Karakaş, H. ve H. Dayıoğlu, “Effect of Major Working Parameters on Mechanical Properties of Yarns in False-Twist Texturing,” ITB International Textile Bulletin, 3, 43-45, (2000). (Engineering index)
57)Canbaz Karakaş, H., “Shrinkage Behaviour of Textured Polyester Yarns”, ITB International Textile Bulletin, 2, 32-35, (2002). (Engineering index)
58)Canbaz Karakaş, H., H. Dayıoğlu ve D. Veit, “Performance of Polyester POY on False-Twist Texturing Machines with High-Temperature Heater”, Chemical Fibers International, December, Vol. 48, 527-529, (1998).
59)Gürsoy, N.Ç. ve H. C. Karakaş, “Basalt Elyafın Özellikleri”, Tekstil & Teknik, Haziran, 189-191 (2003).
60)Canbaz Karakaş, H. Ve T. G. Sadıkoğlu, “Lyocell Lifleri”, Tekstil & Teknik, Temmuz, 150-153 (2000).
61)Canbaz Karakaş, H., “Sentetik Liflerin Temel Yapısı”, Tekstil & Teknik, Kasım, 206-208 (2000).
62)Canbaz Karakaş, H., “Hava Jetli Tekstüre İşleminde Neps Oluşumu”, Tekstil & Teknik, Mart, 58-62 (1999).
63)Canbaz, H., “Textechno ile Tek Elyafın veya Filamentlerin Test Edilmesi”, Tekstil & Teknik, Ocak, 27-28 (1994).
64)Canbaz, H., “Rotasyon Baskı Makinalarında Kullanılan Raklelerin Kullanım Özellikleri”, Tekstil & Teknik, Ocak, 66-68 (1994).
65)Canbaz, H., “Tekstilde Otomasyonun Günümüzdeki ve Gelecekteki Yeri”, Tekstil & Teknik, Ağustos, 18-19 (1993).
66)Canbaz Karakaş, H., “Yalancı-Büküm Tekstüre İşlemi”, Tekstil & Teknoloji, 09, 98-100, (1998).
67)Canbaz Karakaş, H., “Yüksek Performans ve Endüstriyel Uygulamalarda Kullanılan Lifler”, Tekstil & Teknoloji, 02, 69-72, (2001).
68)Canbaz Karakaş, H. ve N. Uçar, “Nanoteknolojinin Tekstil Teknolojisindeki Yeri- The Impact of Nanotechnology on Textile Technology”, Nonwoven-Technical Textiles, 4, 19-26, (2004).
69)Canbaz Karakaş, H. ve N. Uçar, “Akıllı Tekstil ve Giysiler için Biyo İşlemler- Bioprocessing for Smart Textiles and Clothing”, Nonwoven-Technical Textiles, 5, 33-36, (2004).
70)Canbaz Karakaş, H., “Eriyikten Lif Çekim İşleminin Kompüterde Simülasyonu”, Tekstil & Teknoloji, Aralık, 2004, Sayfa 135-138.
71)Gürsoy N.Ç., Karakaş C.H., “Yapay Selüloz Lifleri-Selüloz Asetat”, Tekstil & Teknik, Aralık, 1999, Sayfa 141-143.
72)Canbaz Karakaş H., “Tıpta Kullanılan Biyolojik Olarak Emilebilen Lifler”, Nonwoven-Technical Textiles, 75-78, Ekim, 2005.
73)Canbaz Karakaş H., Parlar Z., “Tekstil Liflerinde Sürtünme”, Tekstil & Teknoloji, Sayı: 133, Temmuz , Sayfa 116-126, 2007.
74)Kasapoğlu Ö., Canbaz Karakaş H., “Organik Pamuk Üretimi ve Gelişimi”, Örme İhtisas, Sayı:7, Sayfa 55-58, Ocak/Şubat 2008.
75)Akbıyık M., Özçelik F., Canbaz Karakaş H., “Balistik Korumada Kullanılan Tekstil Lifleri”, Nonwoven & Technical Textiles, Sayı:21, Sayfa: 55-62, 2008.
76)Armağan O.G., Canbaz Karakaş H., “Kumaş Laminasyon İşlemi, Tekstil & Teknoloji, Sayı: 149, Sayfa:132-143, Kasım, 2008.
77)Kalaoğlu F., Canbaz Karakaş H., Ünlü B., Soybilge P., Demir E., Elektriksel İletken Malzemeler, Sayı: 17, Sayfa: 65-70, 2007.
78)Karakaş H., Yanılmaz M., “Teknik Uygulamalar için Yüksek Performanslı Lifler”, Nonwoven & Technical Textiles, Sayı:24, Sayfa:57-63, 2010.
79)Yanılmaz M., Karakaş H., Kalaoğlu F., “Elektro Lif Çekim Yöntemi ve Poliüretan Nanolifleri”, Nonwoven & Technical Textiles, Sayı:26, Sayfa: 55-63, 2010.
80)Parlar Z., Karakaş H., “Lif Sürtünmesi Ölçüm Yöntemleri”, Tekstil & Teknik, Sayı: 289, Sayfa 94-99, 2009.
81)Karakaş H., Ereke S., Açıkalın P., Türköz E., “Tekstil Yüzeylerinin UV Koruma Faktörlerine Etki Eden Parametreler”, Tekstil & Teknoloji, Sayı: 152, Sayfa: 92-99, 2009.
82)Günerdem H.E., Abraşoğlu A.C., Parlar Z., Karakaş H., “Tekstil Liflerinde Sürtünmenin Önemi ve Ölçümü”, Tekstil & Teknoloji, Ocak 2010 (baskıda).
83)Canbaz Karakaş H., “Polipropilen Lifleri”, Tekstil & Teknik, Sayı:246, S.204, Eylül, 2005.
84)Canbaz Karakaş H., , Esen Ş., Tatlı N.Ö., “Tekstil sektöründe otomotivin yeri ve lastik teknolojisi”, Sayı: 247, S.300, Ekim, 2005.
85)Canbaz Karakaş H., Gürsoy N.Ç., “Polipropilen lifleri: üretimi, özellikleri ve uygulama alanları”, Sayı: 253, S.158, Şubat, 2006.
86)Yanılmaz M., Karakaş H., “Yüksek Performanslı Tekstiller için Nanoteknoloji Uygulamaları”, Tekstil ve Mühendis, Yıl: 18, Sayı: 81, 35-41, 2011.
87) “Fiber Alignment and Straightening in Opening for Open-End Spinning”, Ülkü,Ş., Acar,M., King,T., Özipek,B., Textile Research Journal, 63, 6, 309-312, 1993
88)“Effects of Opening Roller Speed on the Fiber and Yarn Properties in Open-End Friction Spinning”, Ülkü,Ş., Özipek,B., Acar,M., Textile Research Journal, 65, 10, 557-563, 1995
89)“Effects of Assembly and Twisting Nozzle Pressures on the Properties of Two Ply Air Jet Spun Yarns”, Nergis, B.U.,Özipek, B., Textile Research Journal, 71, 8, 711-718 2001
90)“An investigation into the structure of air-jet spun yarns produced with various twisting nozzles in PLYfiL 1000 system”, Nergis, B.U., Özipek B., Indian Journal of Fiber & Textile Research, Vol:27, March, pp:52-58, 2002
91) “Thermo-Insulating Properties of Perpendicular-Laid Versus Cross-Laid Lofty Nonwoven Fabrics”, Sadıkoğlu, T., Özipek, B., Oldich, J., Pan. N.,, Textile Research Journal, 70(2), 121-128, 2000.
92) “Comparing Dynamic ans Static Methods for Measuring Thermal Conductive Properties of Textiles”, Özipek, B., Sadıkoğlu, T., Oldich, J., Pan, N., Textile Research Journal, 68(1), 47-56, 1998.
93) “Effects of Fiber Properties of Acrylics on Rotor Spinning”, Özipek, B., Textile Research Journal, 56, June, 1986.
94)“Effects of Fibre Parameters on Yarn Hairiness”, Özipek, B., İridağ, Y., Candan, C., Textile Month, January, 29-34, 1999.
95)“Analyse der Transportautomatisierung in der Ringspinnerei”, Hossoy, İ., and Özipek, B., Melliand Textilberichte, 4, 252-253,2001
96)“Influence of Varying Structural Parameters on the Properties of 50/50 Wool/Polyester Blended Fabrics”, Önder, E., Kalaoglu, F., and Özipek, B., Textile Res J. 73(10)854-, 860, 2003.
97)“Influence of Varying Structural Parameters on Abrasion Characteristics of 50/50 Wool/Polyester Blended Fabrics”, Kalaoglu F., Önder ,E. and Özipek, B., Textile Res. J. 73(11),980-984, 2003
98)“New Horizons in Yarn Technolgies in Turkey”, Özipek, B., Turkishtime Sectors by TIM, November, 225-233, 2004
99)“Global Trends in the Textile World and Turkey’s Response”, Özipek, B., Textile Asia, 35, 11, November, 36-39, 2004
100) “Investigation of Regenerated Bamboo Fibre and Yarn Characteristics”, Erdumlu N., Ozipek B.; FIBRES & TEXTILES in Eastern Europe 2008, Vol. 16, No. 4 (69) pp. 43-47.
101)“Investigation of Vortex Spun Yarn Properties in Comparison with Conventional Ring and Open-end Rotor Spun Yarns”, Erdumlu, N., Ozipek, B., Oztuna, S., Cetinkaya, S.,Textile Research Journal May 2009, 79: 585-595
102) “Effect of Draft Ratio on Vortex Spun Yarn Properties”, Erdumlu N., Ozipek B.; FIBRES & TEXTILES in Eastern Europe 2010, Vol. 18, No. 3 (80) pp. 38-42.
103)“The structure and properties of carded cotton vortex yarns”, Erdumlu, N., Ozipek, B., Oxenham, W., Textile Research Journal, May 2012, 82: 708-718
104)“Açık-Uç (Open-End) İplikçiliğinde Kullanılan Lif Açma Mekanizmaları”, Özipek, B., UÜ. Mühendislik Fakültesi Dergisi, C1,S1,109-116, 1984
105) “Pamuk İplikçiliğinde Tarak ve Cer Makinalarında Düzgünsüzlük Kontrolu (Regülatörler)”, Özipek, B. ve Köseoğu, M., Tekstil ve Teknik, Mart, 3-11, 1985
106) “Akrilik Liflerinin Yapıları, Özellikleri ve Kullanım Alanları”, Özipek, B., Tekstil ve Teknik, Nisan, 6-14, 1985
107) “Açık-Uç (Open-End) İplikçiliği I, Genel İplik Özellikleri ve Büküm Formasyonu”, Özipek, B., Tekstil ve Teknik, Mayıs, 24-28, 1985
108) “Tekstil Sanayiinde Bilgisayarların Dünü, Bugünü ve Yarını”, Özipek, B., Mühendis ve Makina Dergisi, C26, S309, 20-24, 1985
109)“Teknolojik Gelişmeler ve Önemi”, Özipek, B., İstanbul Tekstil ve Konfeksiyon İhracatçı Birlikleri (İTKİB) Aylık Bülten, Eylül, sayı 9, 13-15, 1990
110) “Tekstilde Kalite ve Kontrol”, Özipek, B., Dünya Gazetesi, S6, 15 Aralık 1990
111)“Çağdaş Teknoloji ile İleriye Doğru”, Özipek, B., Tekstil ve Teknik, Mayıs, 20, 1990
112) “Ring İplikçiliğinde Otomasyon”, Hossoy, İ, ve Özipek, B., Tekstil İşveren, 7, 22-25, 2000
113) “Developing Turkish Home Textile Industry”, Özipek, B., HOMEX International Home Textile Magazine, 1, 80, 2003
114)Eryuruk SelinHanife , Kalaoğlu Fatma, Bahadir SenemKursun, Jevšnik Simona, “Analysing the Effect of Decatising on the Frictional Properties of Wool Fabrics”, Fibers&Textiles in Eastern Europe, 2014, Vol 22, No.3(105), 79-83.
115)Selin Hanife ERYURUK, “Clothing Assembly Line Design Using Simulation and Heuristic Line Balancing Techniques”, Tekstil ve Konfeksiyon, Ekim-Aralık 2012, Vol 22, No.4, 360-368.
116)Selin Hanife ERYURUK, “Greening of the Textile and Clothing Industry”, Fibers&Textiles in Eastern Europe, 2012, Vol 20, No.6A(95), 22-27.
117)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “Comparision of Logistics and Clothing Sectors for a Logistics Center Site Selection using AHP”, Fibers&Textiles in Eastern Europe, 2013, Vol 21, No.2(98), 13-18.
118)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “A Site Selection Model For Establishing A Clothing Logistics Center”, Tekstil ve Konfeksiyon, January-March 2012, Vol 22, Issue 1, 40-47.
119)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “A Logistics Center Design for Turkish Clothing Industry”, Fibers&Textiles in Eastern Europe, 2011, Vol 19, 05(88), 17-22.
120)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “Evaluation Of Globalization Strategies And Internal Analysis Of The Turkish Clothing Industry”, Tekstil ve Konfeksiyon, April-June 2011, Vol 21, Issue 2, 100-106.
121)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “Konfeksiyon Üretiminde İstatistiksel Yöntemle Montaj Hattı Dengeleme”, Tekstil ve Konfeksiyon,January-March 2011, Vol 21, Issue 1, 65-71.
122)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “Logistics as a Competitive Strategy The Analysis of The Clothing Industry In Terms of Logistics”, Fibers&Textiles in Eastern Europe, Vol 19, No. 1(84),2011, 12-17.
123)Selin Hanife ERYURUK, Besoa RABENASOLO, Fatma KALAOGLU, Murat BASKAK, “Evaluation of Globalization Strategies: External Analysis of Turkish Clothing Industry”, Textile Research Journal, September 2010, Vol (80) 14, 1379-1391.
124)Selin Hanife ERYURUK, Fatma KALAOGLU, “The Effects of Different Amounts of Lubricant Application on The Sewing Thread Performance Properties”, Textile Research Journal, June 2010, Vol (80) 12, 1232-1242.
125)Selin Hanife ERYURUK, Fatma KALAOGLU, Murat BASKAK, “Assembly Line Balancing in a Clothing Company”, Fibers&Textiles in Eastern Europe, January/March 2008, Vol. 16, No.1 (66), s. 93-98.
126)S Kursun Bahadir, S. Thomassey, V Koncar, F Kalaoglu, "An algorithm based on neuro-fuzzy controller implemented in a smart clothing system for obstacle avoidance", International Journal of Computational Intelligence Systems, Vol. 6, No. 3, 05/2013, s. 503-517
127)S.Kursun Bahadir, S. Cebi, C. Kahraman, F. Kalaoglu, "Developin a smart clothing system for blinds based on information axiom", International Journal of Computational Intelligence Systems, Vol. 6, No. 2, 03/2013, s. 279-292
128)S Kursun Bahadir, V Koncar, F Kalaoglu, "Wearable obstacle detection system fully integrated to textile structures for visually impaired people", Sensors and Actuators A: Physical, No. 179, 07/2012, s. 297-311
129)S.Kursun Bahadir, F.Kalaoglu, V.Koncar, "Analysis of Vibrotactile Perception via e-Textile Structure Using Fuzzy Logic", Fibres & Textiles in Eastern Europe, Vol. 95, No. 6, 11/2012, s. 91-97
130)S.Kursun Bahadir, V.Koncar, F.Kalaoglu, "Crosstalk Effect In A Fabric Circuit Developed For Multi-Connection Of Sonar Sensors", Tekstil ve Konfeksiyon, Vol. 22, No. 3, 2012, s. 197-202
131)S. Kursun Bahadir, V. Koncar, F. Kalaoglu, I. Cristian, S. Thomassey, "Assessing the Signal Quality of Ultrasonic Sensor on Different Conductive Yarns used as Transmission Lines", Fibres & Textiles in Eastern Europe, Vol. 19, No. 5(88), 2011, s. 75-81
132)S. Kursun Bahadir, F. Kalaoglu, S. Thomassey, I. Cristian, V. Koncar, "A Study on the beam pattern of ultrasonic sensor integrated to textile structure", Journal of Clothing Science and Technology, Vol. 23, No. 4, 2011, s. 232 - 241
133)S. Kursun, G. Ozcan, "Investigation of UV Protection of Swimwear Fabrics", Textile Research Journal, Vol. 80, No. 17, 2010, s. 1811-1818
134)S. Kursun, F. Kalaoglu, "Dikim Bandında Simulasyonla Bant Dengeleme", Tekstil ve Konfeksiyon, Vol. 20, No. 3, 2010, s. 257-261
135)S. Kursun, M. Dincmen, F. Kalaoglu, "Production Line Modeling In Clothing Industry By Simulation", Tekstil, Vol. 58, No. 5, 2009, s. 186-195
136)S. Kursun, F. Kalaoglu, "Simulation Of Production Line Balancing In Apparel Manufacturing", Fibres & Textiles In Eastern Europe, Vol. 17, No. 4(75), 2009, s. 68-71
137)S. Kursun, "Konfeksiyon İşletmelerinde Benzetimin Önemi", Konfeksiyon Teknik, No. 164, 04/2008
138)I. Gocek, S. Kursun, G. Kucuk, "Nanotechnology Applications In Textile Industry", Nonwoven Technical Textiles Technology Magazine, No. 14, 2007
139)ERDUMLU, N., OXENHAM, W. and OZIPEK, B., “The Impact of Combing and Processing Parameters on the Structure and Properties of Fine Count Vortex Yarns”, Textile Research Journal, 2013, Vol.83(4), 396-405.
140)ERDUMLU, N., OZIPEK, B. and OXENHAM, W., “The Structure and Properties of Carded Cotton Vortex Yarns”, Textile Research Journal, 2012, Vol.82(7), 708-718.
141)ERDUMLU, N., OZIPEK, B., OZTUNA, A.S. and CETİNKAYA, S., "Investigation of Vortex Spun Yarn Properties in Comparison with Conventional Ring and Open-End Rotor Spun Yarns”, Textile Research Journal, 2009, Vol.79(7), 585-595.
142)ERDUMLU, N. and OZIPEK, B., "Effect of Draft Ratio on the Properties of Vortex Spun Yarn", Fibres & Textiles in Eastern Europe, 2010, Vol.18, No.3(80), 38-42.
143)ERDUMLU, N., “Analysis of Global Impacts on the Turkish Cotton Spinning Industry”, Fibres & Textiles in Eastern Europe, 2009, Vol.17, No.5(76), 9-13.
144)ERDUMLU, N. and OZIPEK, B., "Investigation of Regenerated Bamboo Fibre and Yarn Characteristics", Fibres & Textiles in Eastern Europe, 2008, Vol.16, No.4(69), 43-47.
145)ERDUMLU, N. and SARICAM, C., "Wicking and Drying Properties of Conventional Ring and Vortex Spun Yarns and Fabrics", Journal of the Textile Institute, 2013, Vol. 104, No. 12, 1284-1291.
146)ERDUMLU, N., OZIPEK, B., YILMAZ, G. and TOPATAN, Z. "Reuse of Effluent Water Obtained in Different Textile Finishing Processes ", Autex Research Journal, 2012, Vol.12, No.1, 23-28.
147)SARICAM, C. and ERDUMLU,N., “Classification of Distribution Channels of Textile and Apparel Retailers in Turkey”, The Research Journal of the Costume Culture, 2013, Vol.21, No.6, 961-966.
148)ERDUMLU, N. and SARICAM, C., “Measuring the Efficiency of Turkish Apparel Retailers”, Ege Academic Review, 2013, Vol.13, No.2, 237-244.
149)SARICAM, C. and ERDUMLU, N., “Evaluating Efficiency Levels Comparatively: Data Envelopment Analysis Application for Turkish Textile and Apparel Industry”, Journal of Industrial Engineering and Management, 2012, Vol.5, No.2, 518-531.
150)ERDUMLU, N., OZIPEK, B. and OXENHAM, W., “Vortex Spinning Technology”, Textile Progress, 2012, Vol. 44, No. 4, 141-174.
151)ERDUMLU, N., OXENHAM, W. ve ÖZİPEK, B., “Vortex, Konvansiyonel Ring ve Kompakt Ring İpliklerin Özellikleri”, Tekstil Teknolojileri Elektronik Dergisi, 2013, Cilt: 7, Sayı: 2, 7-15.
152)ERDUMLU, N. ve OXENHAM, W., “Katlı Vortex İpliklerin Mukavemet ve Uzama Özellikleri”, Tekstil Teknolojileri Elektronik Dergisi, 2011, Cilt: 5, Sayı: 3, 1-9.
153)ERDUMLU, N., “Murata Vortex Spinner (MVS) İplik Eğirme Sisteminde Elde Edilen İpliğin Yapısı ve İplik Özelliklerini Etkileyen Faktörler”, Tekstil Teknolojileri Elektronik Dergisi, 2010, Cilt: 4, Sayı: 1, 98-108.
154)ERDUMLU, N., “Bambu Lifi ve Özellikleri”, Tekstil Teknolojileri Elektronik Dergisi, 2008, Cilt: 2, Sayı: 3, 45-50.
155)ERDUMLU, N., “Farklı Prensiplerle Üretilmiş Kompakt İpliklerin Performansları”, Örme İhtisas Dergisi, Yıl:5, Sayı:29, Mayıs-Haziran 2008.
156)SARICAM, C., KALAOGLU,F., POLAT, S., CASSILL, N.L., (2013) The application of Godet’s Scenario Methodology on Turkish apparel industry, Fibres & Textiles in Eastern Europe,2-98,7-12
157)KALAOĞLU,F., SARIÇAM, C., (2007) Analysis of Modular Manufacturing System in Clothing Industry by Using Simulation, Fibres &Textile in Eastern Europe, July / September 15, 3 , 62, 93-96
158)SARIÇAM, C., KALAOĞLU,F., POLAT, S., (2012) Determination of key variables for future anticipation of Turkish apparel industry, Tekstil ve Konfeksiyon, 2, 137-143.
159)ERDUMLU, N.,SARICAM, C., (2013) Wicking and Drying Properties of Conventional Ring and Vortex Spun Cotton Yarns and Fabrics, Published Online in 21.10.2013 in Journal of Textile Institute
160)SARICAM, C., KALAOGLU,F., (2014 ) Investigation of The Wicking and Drying Behavior of Polyester Woven Fabrics, Accepted for Publication in Fibres and Textiles in Eastern Europe
161)SARIÇAM, C., AKSOY, A.,KALAOĞLU,F., (2012) Determination of the Priorities of Customer Requirements and Quality in Apparel Retail Industry, International Journal of Business and Social Science, 3, 16, 242-250
162)SARIÇAM, C., ERDUMLU, N., (2012) Evaluating Efficiency Levels
Comparatively: Data Envelopment Analysis Application for Turkish Textile and Apparel Industry, Journal of Industrial Engineering and Management, 2,2,518-531
163)ERDUMLU, N., SARIÇAM, C., (2013) Measuring the Efficiency of Turkish Apparel Retailers, Ege Akademik Bakış Dergisi, 13,2,237-244
164)SARICAM, C., KALAOGLU, F., POLAT, S., “Tekstil ve hazır giyim sektörü ve strateji geliştirme çalışmaları”,Tekstil Teknik, September 2011
165)SARICAM, C., KALAOGLU, F.,“Konfeksiyonda Modüler Üretim Sistemi”, Örme İhtisas Dergisi,Kasım-Aralık,2007
166)SARICAM, C., KALAOGLU, F.Tekstil ve Hazır Giyim Sektöründe Tam Zamanında Üretim Sistemi, Örme İhtisas Dergisi, Eylül-Ekim, 2007
167)SARIÇAM, C., “Konfeksiyon İşletmelerinde Montaj Hattı Oluşturulması ve Dengelenmesi Üzerine Bir Çalışma” Konfeksiyon &Teknik, sf.24-32, Şubat 2003
168)SARIÇAM, C., “Konfeksiyon Mamullerinde Bakım Talimatları, Konfeksiyon Teknik, sf. 80-90, Haziran 2003
169)SARIÇAM, C., TANYAŞ M., “İşletmelerde Verimlilik Yönetim Sisteminin Oluşturulması”, Örme İhtisas Dergisi, sf 36-40, Kasım-Aralık 2004